Products Archive - Pro Systems Turbochargers

Ferrari F40 – LH & RH

$5,138.00 – $5,438.00

1987-1992 Ferrari F40 Turbo Charger

Be aware, the Ferrari F40 has both a left and right turbo design.

The precision of assembly required on this model is of the highest caliber and requires a facility with proper training for proper analysis and assembly.

We have that capabilty. Be aware, an inspection of the unit must be done in a temperature controlled environment to determine the unit is within its operating dimensions prior to being rebuilt.

Of course before you send yours in, do a visual inspection for any damaged items and we can get you pricing on replacing those components.

Please package the item carefully and properly insure it.

Contact us prior to sending in the unit so we can personally attend to your order and give you an accurate repair time on the unit(s).

All rebuilds are completed using premium components and in many cases are upgraded to 360 degree thrust bearings.

SAY NO TO SINGLE PLANE BALANCING!!

Dual plane Digital Computerized balancing is performed in house and on every turbocharger we build to ensure long life and smoother than factory operation.

Don’t get fooled by those cheap billet impellers you see online, we bought them and were disappointed. In our own test vehicle, not a single one made more power than a stock cast impeller. Most spooled up slower and in one case we lost 3 lbs of boost compared to a stock impeller!

If you are going to improve your turbos performance, this Bullseye Impeller is the one. Its a properly designed impeller, incredible precision machining work and its shape is proven and will be apparent the first time you hit the throttle. It works!

At PRO SYSTEMS we use Bullseye Brand Billet impellers. A high quality design that is far superior to the OEM cast impellers.

* Add $325 for Bullseye Billet Compressor wheel

*$250 rebuild-able core charge refunded upon core arrival and inspection.

Will also fit:

1994 & 1996

Select options Details
Ferrari 488 GTB Turbocharger

$5,300.00

Ferrari 488 GTB Turbocharger

**Please contact us for Rebuild/Update pricing on this unit
Did your 488 turbo go boom!!?? They do that AND we have the FIX! At PRO SYSTEMS TURBO we rebuild your stock VU21 & VU22 Ferrari 488 GTB turbos by rebuilding the ceramic ball bearing cartridges, replacing the billet compressor wheel, installing a new Inconel Shaft with turbine that typically fail from flexing and over-speeding. Once the bearing assembly has been replaced it is sent off for VSR balancing which tests the internals above OEM standards and 8,000 RPMs past the 488 Redline to ensure stability. While this is done we inspect all of your housing and buff out any imperfections from the turbine hitting the exhaust housing. Once your turbochargers have been rebuilt and passed final inspection we reseal them and get them back to you! Seal Plates have also been known to fail and we have those parts available if your rebuild requires them.

All rebuilds are completed using premium components.

Prices Starting at $5,300 each + Shipping

Select options Details
2016-2018 McLaren 570S and 570GT

$1,295.00 – $2,795.00

McLaren 570S or 570GT Turbocharger
**Please contact us for Rebuild/Update pricing on this unit

All rebuilds are completed using premium components and in many cases are upgraded to 360 degree thrust bearings.

SAY NO TO SINGLE PLANE BALANCING!!

Dual plane Digital Computerized balancing is performed in house and on every turbocharger we build to ensure long life and smoother than factory operation.

Select options Details
Cummins HE551V Complete Turbocharger

$2,000.00

This is a brand new HE551V turbocharger that will fit on ISX and QSX15 motors.

Turbo Model: HE551V

Part Number: 4043225

OEM Part #: 2881994, 4089551, 4055306, 2842412, 2843888, 4041090, 4043215, 2881993

Add to cart Details
Cummins 8.3L ISC Turbocharger

$280.00 – $680.00

Your core can be rebuilt for as low as $280.00!

All rebuilds are completed using premium components and in many cases are upgraded to 360 degree thrust bearings.

All Turbochargers are Inspected for alignment, shafts are inspected for wear and run out. Housings are inspected for cracks and surfaces are trued (on our own In House CNC Machines) if required.

Proper seals meeting or exceeding OEM specifications are installed. Proper seal fitment is tested and verified.

The turbocharger is Dual Plane balanced.

After it passes Quality Control inspection, the Turbocharger is stamped with a Serial number that identifies its final specifications and all the parts installed in the rebuild and upgrade (if performed) are recorded to its history file.

SAY NO TO SINGLE PLANE BALANCING!!

Dual plane Digital Computerized balancing is performed in house and on every turbocharger we build to ensure long life and smoother than factory operation.

Don’t get fooled by those cheap billet impellers you see online, we bought them and were disappointed. In our own test vehicle, not a single one made more power than a stock cast impeller. Most spooled up slower and in one case we lost 3 lbs of boost compared to a stock impeller!

If you are going to improve your turbos performance, this Bullseye Impeller is the one. Its a properly designed impeller, incredible precision machining work and its shape is proven and will be apparent the first time you hit the throttle. It works!

At PRO SYSTEMS we use Bullseye Brand Billet impellers. A high quality design that is far superior to the OEM cast impellers.

* Add $325 for Bullseye Billet Compressor wheel

*$250 rebuild-able core charge refunded upon core arrival and inspection.

Will also fit:

8.3L Cummins ISB Turbocharged Diesel Engines

Select options Details
2008-2012 Subaru VF52

$280.00 – $680.00

Your core can be rebuilt for as low as $280.00!

All rebuilds are completed using premium components and in many cases are upgraded to 360 degree thrust bearings.

All Turbochargers are Inspected for alignment, shafts are inspected for wear and run out. Housings are inspected for cracks and surfaces are trued (on our own In House CNC Machines) if required.

Proper seals meeting or exceeding OEM specifications are installed. Proper seal fitment is tested and verified.

The turbocharger is Dual Plane balanced.

After it passes Quality Control inspection, the Turbocharger is stamped with a Serial number that identifies its final specifications and all the parts installed in the rebuild and upgrade (if performed) are recorded to its history file.

SAY NO TO SINGLE PLANE BALANCING!!

Dual plane Digital Computerized balancing is performed in house and on every turbocharger we build to ensure long life and smoother than factory operation.

Don’t get fooled by those cheap billet impellers you see online, we bought them and were disappointed. In our own test vehicle, not a single one made more power than a stock cast impeller. Most spooled up slower and in one case we lost 3 lbs of boost compared to a stock impeller!

If you are going to improve your turbos performance, this Bullseye Impeller is the one. Its a properly designed impeller, incredible precision machining work and its shape is proven and will be apparent the first time you hit the throttle. It works!

At PRO SYSTEMS we use Bullseye Brand Billet impellers. A high quality design that is far superior to the OEM cast impellers.

* Add $325 for Bullseye Billet Compressor wheel

*$250 rebuild-able core charge refunded upon core arrival and inspection.

Will also fit:

05-09 Subaru Legacy

Select options Details
1996-1997 Porsche 911 Turbocharger

$280.00 – $660.00

Your core can be rebuilt for as low as $280.00!

All rebuilds are completed using premium components and in many cases are upgraded to 360 degree thrust bearings.

All Turbochargers are Inspected for alignment, shafts are inspected for wear and run out. Housings are inspected for cracks and surfaces are trued (on our own In House CNC Machines) if required.

Proper seals meeting or exceeding OEM specifications are installed. Proper seal fitment is tested and verified.

The turbocharger is Dual Plane balanced.

After it passes Quality Control inspection, the Turbocharger is stamped with a Serial number that identifies its final specifications and all the parts installed in the rebuild and upgrade (if performed) are recorded to its history file.

SAY NO TO SINGLE PLANE BALANCING!!

Dual plane Digital Computerized balancing is performed in house and on every turbocharger we build to ensure long life and smoother than factory operation.

Porsche owners... FEEL THE POWER, HEAR THE SOUND!!

Upgrade your Porsche to the Razor Billet Wheel!! A high quality design that is far superior to the OEM cast impellers.

Faster spool up, great sound (as it cuts the air), more boost potential and built strong enough for competition use!

* Add $260 for a RAZOR Billet Compressor wheel

*$250 rebuild-able core charge refunded upon core arrival and inspection.

Select options Details
1994-2005 Porsche 993 and 996 K16 Turbo

$280.00 – $640.00

Your core can be rebuilt for as low as $280.00!

1994-2005 Porsche 993/996 series K16 Turbocharger.

Model numbers:

993-123-014-51

993-123-014-52

5314-970-xxxx

5314-988-xxxx

5314-990-xxxx

5316-970-6726

5316-970-6727

5316-970-6735

5316-988-6736

5316-990-xxxx

5327-970-xxxx

From 1994-2005 Porsche used the K16 on the 911 model Porsches.

This was a good reliable turbocharger with long life expectancy and excellent performance for their intended power level.

Rebuilding these units is a pretty straight forward operation. We use an improved seal design that offers a better seal and longer life than the OEM units (this reduces any tailpipe oil smoke under a load to almost zero) and offers the ability to run the turbocharger harder under a load for longer periods without a threat of harming the oil seals.

Rebuild yours for only $280.00

If you are looking for more power OR a really cool turbo sound, check our our RAZOR Billet impellers as an upgrade to your Turbocharger. Talk to one of our representatives on an impeller for your turbo.

The K16 has a few different versions and has employed different housings over the years.

The K16/K24 hybrid for example is a 52.5mm/68mm Compression impeller.

But most of the K16 versions use the 47.5mm/65.94mm or the 40.5mm/60.5mm version impellers.

But don't worry, we have RAZOR impellers available for all these sizes.

Once again we have improved the design of the impeller over the OEM impeller and employed shapes we have developed for our racing turbocharger impellers for use in the RAZOR for the K16.

These new shapes and improved material design decrease spool up time and offers more power potential with less heat developed at the same or higher boost levels.

PLUS, we really love the sound of the RAZOR impeller.

Priced at $260.00 the RAZOR impeller is the next good move for your turbocharger in performance, sound and reliability.

Sound cool, go fast!

*$250 rebuild-able core charge refunded upon core arrival and inspection.

Select options Details
1993-1998 Porsche K27 Turbocharger 911/930/964/965

$280.00 – $640.00

Your core can be rebuilt for as low as $280.00!

1993-1998 Porsche K27 Turbocharger for the 911/930/964/965

Model number:

5327-970-7005

5327-970-7006

5327-970-7018

5328-970-7004

From 1993-1998 Porsche used the K27 on the 911/930/964/965 model Porsches.

Its also a popular retrofit for Porsche 911s going back as far as 1978.

Rebuilding these units is a pretty straight forward operation. We use an improved seal design that offers a better seal and longer life than the OEM units (this reduces any tailpipe oil smoke under a load to almost zero) and offers the ability to run the turbocharger harder and for longer periods of time without a threat of harming the oil seals.

Rebuild yours for only $280.00

The K27 employs a 52.40/76.00mm Compressor impeller. A pretty large size for an under 4 liter engine (so lag is pretty obvious), so stepping up to our RAZOR billet impeller is a great move while you are getting the unit rebuilt.

Once again we have improved the design of the impeller over the OEM impeller and employed shapes we have developed for our racing turbocharger impellers for use in the RAZOR for the K27.

These new shapes and improved material design decrease spool up time and offers more power potential with less heat developed at the same or higher boost levels.

PLUS, we really love the sound of the RAZOR impeller.

Priced at $260.00 the RAZOR impeller is the next good move for your turbocharger in performance, sound and reliability.

Sound cool, go fast!

*$250 rebuild-able core charge refunded upon core arrival and inspection.

Select options Details
2001-2015 997 Turbo

$280.00 – $640.00

Your core can be rebuilt for as low as $280.00!

From 2001-2015 Porsche used the K04 Turbocharger on the 997 series Porsches.

Model numbers:

5304-970-0049

5304-970-0050

5304-970-0054

5304-970-0059

5304-970-0060

5304-970-0061

These Turbochargers were excellent in design but under hard use would develop oil seal issues.

During the rebuild process we upgrade them internally to a triple oil bypass design to really improve their ability to operate under hard use and reliability/longevity in operation.

Rebuild yours for only $280.00

The K04 employs a 43.30/56.08 Compressor impeller. The original design is better in spool time over previous models but our RAZOR impeller takes it to a whole new level.

Our improved tip height and shape (similar to what is used on our Race only impellers) really offers instant response to throttle movement and a sound that lets everyone know under boost... you aren't messing around. We really love the sound of this impeller and its performance in the K04 housing.

Priced at $260.00 the RAZOR impeller reduces lag AND offers the potential to increase boost without fear of impeller failure.

Plus the RAZOR impeller really cuts the air so you can hear it and feel it!

*$250 rebuild-able core charge refunded upon core arrival and inspection.

Select options Details
1996-2005 911 GT2 and X50

$280.00 – $640.00

Your core can be rebuilt for as low as $280.00!

From 1996-2005 Porsche used the K24 on the 911 GT2 and X50 Porsches. This offered big power gains over the smaller K14/K16 Turbos and this was done by employing the larger housing of the K24 design turbocharger.

Although the K24 showed an increase in power, lag was inherent due to the larger housing and obvious to everyone that owns one.

But don't worry, we have the fix. If you want to reduce the lag inherent in this design check out our RAZOR impeller.

Priced at $260.00 the RAZOR impeller reduces lag AND offers the potential to increase boost by upgrading to a 1.0 Bar wastegate and 5.0 bar Fuel pressure regulator to exceed 575 horsepower.

Plus the RAZOR impeller really cuts the air so you can hear it and feel it!

Sound cool, go fast!

*$250 rebuild-able core charge refunded upon core arrival and inspection.

Select options Details
Cummins HX35W Complete Turbocharger

$395.00

This is a brand new HX35W turbocharger that will fit on Dodge Ram 5.9 Turbo 99-02.

Turbo Model: HX35W

Part Number: 3590104

Reference Part #: 3590105, 3800397, 3800799

Add to cart Details

Products

1987-1992 Ferrari F40 Turbo Charger

Be aware, the Ferrari F40 has both a left and right turbo design.

The precision of assembly required on this model is of the highest caliber and requires a facility with proper training for proper analysis and assembly.

We have that capabilty. Be aware, an inspection of the unit must be done in a temperature controlled environment to determine the unit is within its operating dimensions prior to being rebuilt.

Of course before you send yours in, do a visual inspection for any damaged items and we can get you pricing on replacing those components.

Please package the item carefully and properly insure it.

Contact us prior to sending in the unit so we can personally attend to your order and give you an accurate repair time on the unit(s).

All rebuilds are completed using premium components and in many cases are upgraded to 360 degree thrust bearings.

SAY NO TO SINGLE PLANE BALANCING!!

Dual plane Digital Computerized balancing is performed in house and on every turbocharger we build to ensure long life and smoother than factory operation.

Don’t get fooled by those cheap billet impellers you see online, we bought them and were disappointed. In our own test vehicle, not a single one made more power than a stock cast impeller. Most spooled up slower and in one case we lost 3 lbs of boost compared to a stock impeller!

If you are going to improve your turbos performance, this Bullseye Impeller is the one. Its a properly designed impeller, incredible precision machining work and its shape is proven and will be apparent the first time you hit the throttle. It works!

At PRO SYSTEMS we use Bullseye Brand Billet impellers. A high quality design that is far superior to the OEM cast impellers.

* Add $325 for Bullseye Billet Compressor wheel

*$250 rebuild-able core charge refunded upon core arrival and inspection.

Will also fit:

Ferrari 488 GTB Turbocharger

**Please contact us for Rebuild/Update pricing on this unit

McLaren 570S or 570GT Turbocharger

This is a brand new HE551V turbocharger that will fit on ISX and QSX15 motors.

Turbo Model: HE551V

Part Number: 4043225

OEM Part #: 2881994, 4089551, 4055306, 2842412, 2843888, 4041090, 4043215, 2881993

Your core can be rebuilt for as low as $280.00!

All rebuilds are completed using premium components and in many cases are upgraded to 360 degree thrust bearings.

All Turbochargers are Inspected for alignment, shafts are inspected for wear and run out. Housings are inspected for cracks and surfaces are trued (on our own In House CNC Machines) if required.

Proper seals meeting or exceeding OEM specifications are installed. Proper seal fitment is tested and verified.

The turbocharger is Dual Plane balanced.

After it passes Quality Control inspection, the Turbocharger is stamped with a Serial number that identifies its final specifications and all the parts installed in the rebuild and upgrade (if performed) are recorded to its history file.

SAY NO TO SINGLE PLANE BALANCING!!

Dual plane Digital Computerized balancing is performed in house and on every turbocharger we build to ensure long life and smoother than factory operation.

Don’t get fooled by those cheap billet impellers you see online, we bought them and were disappointed. In our own test vehicle, not a single one made more power than a stock cast impeller. Most spooled up slower and in one case we lost 3 lbs of boost compared to a stock impeller!

If you are going to improve your turbos performance, this Bullseye Impeller is the one. Its a properly designed impeller, incredible precision machining work and its shape is proven and will be apparent the first time you hit the throttle. It works!

At PRO SYSTEMS we use Bullseye Brand Billet impellers. A high quality design that is far superior to the OEM cast impellers.

* Add $325 for Bullseye Billet Compressor wheel

*$250 rebuild-able core charge refunded upon core arrival and inspection.

Will also fit:

Your core can be rebuilt for as low as $280.00!

All rebuilds are completed using premium components and in many cases are upgraded to 360 degree thrust bearings.

All Turbochargers are Inspected for alignment, shafts are inspected for wear and run out. Housings are inspected for cracks and surfaces are trued (on our own In House CNC Machines) if required.

Proper seals meeting or exceeding OEM specifications are installed. Proper seal fitment is tested and verified.

The turbocharger is Dual Plane balanced.

After it passes Quality Control inspection, the Turbocharger is stamped with a Serial number that identifies its final specifications and all the parts installed in the rebuild and upgrade (if performed) are recorded to its history file.

SAY NO TO SINGLE PLANE BALANCING!!

Dual plane Digital Computerized balancing is performed in house and on every turbocharger we build to ensure long life and smoother than factory operation.

Don’t get fooled by those cheap billet impellers you see online, we bought them and were disappointed. In our own test vehicle, not a single one made more power than a stock cast impeller. Most spooled up slower and in one case we lost 3 lbs of boost compared to a stock impeller!

If you are going to improve your turbos performance, this Bullseye Impeller is the one. Its a properly designed impeller, incredible precision machining work and its shape is proven and will be apparent the first time you hit the throttle. It works!

At PRO SYSTEMS we use Bullseye Brand Billet impellers. A high quality design that is far superior to the OEM cast impellers.

* Add $325 for Bullseye Billet Compressor wheel

*$250 rebuild-able core charge refunded upon core arrival and inspection.

Will also fit:

05-09 Subaru Legacy

Your core can be rebuilt for as low as $280.00!

All rebuilds are completed using premium components and in many cases are upgraded to 360 degree thrust bearings.

All Turbochargers are Inspected for alignment, shafts are inspected for wear and run out. Housings are inspected for cracks and surfaces are trued (on our own In House CNC Machines) if required.

Proper seals meeting or exceeding OEM specifications are installed. Proper seal fitment is tested and verified.

The turbocharger is Dual Plane balanced.

After it passes Quality Control inspection, the Turbocharger is stamped with a Serial number that identifies its final specifications and all the parts installed in the rebuild and upgrade (if performed) are recorded to its history file.

SAY NO TO SINGLE PLANE BALANCING!!

Dual plane Digital Computerized balancing is performed in house and on every turbocharger we build to ensure long life and smoother than factory operation.

Porsche owners... FEEL THE POWER, HEAR THE SOUND!!

Upgrade your Porsche to the Razor Billet Wheel!! A high quality design that is far superior to the OEM cast impellers.

Faster spool up, great sound (as it cuts the air), more boost potential and built strong enough for competition use!

* Add $260 for a RAZOR Billet Compressor wheel

*$250 rebuild-able core charge refunded upon core arrival and inspection.

Your core can be rebuilt for as low as $280.00!

1994-2005 Porsche 993/996 series K16 Turbocharger.

Model numbers:

993-123-014-51

993-123-014-52

5314-970-xxxx

5314-988-xxxx

5314-990-xxxx

5316-970-6726

5316-970-6727

5316-970-6735

5316-988-6736

5316-990-xxxx

5327-970-xxxx